EasyGen Series_WOODWARD
รูปที่:: 1 /21 ชื่อรูป :: EasyGen Series_WOODWARD รายละเอียด:: EasyGen Series_WOODWARD
|
EasyGen Series_WOODWARD
รูปที่:: 2 /21 ชื่อรูป :: EasyGen Series_WOODWARD รายละเอียด:: EasyGen Series_WOODWARD
|
EasyGen Series_WOODWARD
รูปที่:: 3 /21 ชื่อรูป :: EasyGen Series_WOODWARD รายละเอียด:: EasyGen Series_WOODWARD
|
EasyGen Series_WOODWARD
รูปที่:: 4 /21 ชื่อรูป :: EasyGen Series_WOODWARD รายละเอียด:: EasyGen Series_WOODWARD
|
EasyGen Series_WOODWARD
รูปที่:: 5 /21 ชื่อรูป :: EasyGen Series_WOODWARD รายละเอียด:: EasyGen Series_WOODWARD
|
Electronic Governor_EG2000
รูปที่:: 6 /21 ชื่อรูป :: Electronic Governor_EG2000 รายละเอียด:: Electronic Governor : EG2000
Features
- Works on a wide ranges of MPU/flywheel frequencies
- 15 Amp Max Output
- Suitable for all types of diesel and Gas engines
- High Sensitivity and stable at Low Frequency Variations
- Moisture, vibration, and rust protected, Epoxy encapsulated electronics
- For Use With Isochronous Generators & Automatic Paralleling PLC controls
- Idle Speed Adjustment and connections for a Remote Speed POT
|
Actuators _WOODWARD
รูปที่:: 7 /21 ชื่อรูป :: Actuators _WOODWARD รายละเอียด:: Actuators _WOODWARD
|
Digital Speed Control _WOODWARD
รูปที่:: 8 /21 ชื่อรูป :: Digital Speed Control _WOODWARD รายละเอียด:: Digital Speed Control _WOODWARD
|
Electronic Governor Systems & Actuators
รูปที่:: 9 /21 ชื่อรูป :: Electronic Governor Systems & Actuators รายละเอียด:: Electronic Governor Systems & Actuators
|
Electronic Governor Systems & Actuators
รูปที่:: 10 /21 ชื่อรูป :: Electronic Governor Systems & Actuators รายละเอียด:: Electronic Governor Systems & Actuators
|
GAC Governor_3044195
รูปที่:: 11 /21 ชื่อรูป :: GAC Governor_3044195 รายละเอียด:: GAC Governor_3044195
|
GAC Governor_3408324
รูปที่:: 12 /21 ชื่อรูป :: GAC Governor_3408324 รายละเอียด:: GAC Governor_3408324
|
GAC Governor_ESD5111
รูปที่:: 13 /21 ชื่อรูป :: GAC Governor_ESD5111 รายละเอียด:: GAC Governor_ESD5111
|
Woodward TecJet 52
รูปที่:: 14 /21 ชื่อรูป :: Woodward TecJet 52 รายละเอียด:: Benefits:
Flexible inputs to use the engine control system of an OEM. Communication in two
directions possible with other control systems by means of the integrated CANbus.
Fast response to flow commands, which makes it possible to accept large load steps
without losing engine speed.
High turn-down ratio that makes it possible to use one TecJet model for a complete
engine family, 6 to 24 cylinders.
|
Woodward 2301A
รูปที่:: 15 /21 ชื่อรูป :: Woodward 2301A รายละเอียด:: Features :
A wide dynamic adjustment range to accommodate a variety of prime movers,
including diesel or gas engines, or steam or gas turbines.
Protection from electromagneticand radio frequency interference.
An internal, isolated power supply for improved noise immunity and ground-loop
protection.
Low-voltage model: Once powered at 15 volts or above, the control will operate
with a supply voltage as low as 9.6 volts and as high as 77 volts for up to five
minutes, or 120 volts for 1/10 of a second without damage and with negligible
control transients. Normal power is 2045 Vdc.
High -voltage model: The control will operate with a supply voltage as low as 75
Vdc (60 Vac) and as high as 200 Vdc (140 Vac) for up to five minutes, or 300
Vdc (212 Vas) for 1/10 second without damage, and with negligible control
transients. Normal power is 90150 Vdc or 88132 Vac.
|
Woodward Flo-Tech
รูปที่:: 16 /21 ชื่อรูป :: Woodward Flo-Tech รายละเอียด:: Description:
The Flo-Tech family of electrically actuated throttles/valves controls flow. The flow is
a function of throttle position and pressure drop. The throttle position is proportional
to the position command signal.
The Flo-Tech ITB can be made with 33, 48, 60, 68, and 75 mm bore sizes for
various applications. Command input options come in PWM, 05 Vdc, 420 mA, and
0200 mA. Position feedback output signal will vary from 0.5 ± 0.1 volts to 4.5 ± 0.1
volts nominal at the min and max actuatorposition respectively. The PWM command
input version will return to minimum actuator position with a command of greater
than 95% duty cycle.
The Flo-Tech actuator requires a power supply of 932 Vdc. The supply must be
capable of supplying a sustained 25 watts at steady-state and 50 watts for transient
state conditions for at least 0.25 second.
|
Woodward ProAct actuator
รูปที่:: 17 /21 ชื่อรูป :: Woodward ProAct actuator รายละเอียด:: Description :
The ProAct ISC can be base- or flange-mounted on-engine, and will withstand high
levels of vibration and temperature. The output shaft is a 0.625-36 serrated tooth
shaft. Four levels of outputtorque are available. The ProAct ISC will also mount
directly to Woodward integrated throttle bodies. The control accepts a speed input
signal from a variable reluctance speed sensor, commonly called an MPU. The
control may also be user-configured as a positioner accepting an analog position
command signal or a J1939 CAN demand signal. Future options will include a
CANopen communication capability.
|
Woodward ProAct II
รูปที่:: 18 /21 ชื่อรูป :: Woodward ProAct II รายละเอียด:: Description:
The ProAct control system is a combination of a 16-bit microprocessor control and a
limited-angle rotational torque motor (actuator). The system features user-friendly
menus to provide extreme flexibility in the development of special control schemes
for different types of engines.
Two different ProAct actuators are available. The ProAct I actuator provides 1.4 Nxm
(1.0 lb-ft) of torque in steady state and 3.55 J (2.62 ft-lbs) of work over 75° of travel.
The ProAct II provides 2.7 Nxm (2.0 lb-ft) of torque in steady state and 7.11 J (5.24
ft-lbs) of work over the 75° of rotation.
|
Woodward ProAct ITB
รูปที่:: 19 /21 ชื่อรูป :: Woodward ProAct ITB รายละเอียด:: Woodward ProAct ITB
|
Woodward TecJet 50 Plus
รูปที่:: 20 /21 ชื่อรูป :: Woodward TecJet 50 Plus รายละเอียด:: BENEFITS:
Flexible inputs, so an OEM engine
control system can be used. The
EGS-01 is therefore not an absolute
requirement. Communication in two
directions possible with other control
systems by means of the integrated
CAN bus.
Fast response to flow commands,
which makes it possible to accept
large load steps without losing
engine speed.
High turn-down ratio that makes it
possible to use one TecJet model for
a wide range of fuel flow
requirements.
The non-linear opening
characteristics of the TecJet gas
control valve enable you to control
the gas flow at idle with accuracy
and stability.
Size: equivalent to Ø17 mm
|
Spare Parts for Diesel & Gas Engines
รูปที่:: 21 /21 ชื่อรูป :: Spare Parts for Diesel & Gas Engines
|
|
|